 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by H11D1/D H11D1 * GlobalOptoisolatorTM 6-Pin DIP Optoisolators High Voltage Transistor Output (300 Volts) The H11D1 and H11D2 consist of gallium arsenide infrared emitting diodes optically coupled to high voltage, silicon, phototransistor detectors in a standard 6-pin DIP package. They are designed for high voltage applications and are particularly useful in copy machines and solid state relays. * To order devices that are tested and marked per VDE 0884 requirements, the suffix "V" must be included at end of part number. VDE 0884 is a test option. Applications * Copy Machines * Interfacing and coupling systems of different potentials and impedances * Monitor and Detection Circuits * Solid State Relays MAXIMUM RATINGS (TA = 25C unless otherwise noted) Rating INPUT LED Forward Current -- Continuous Forward Current -- Peak Pulse Width = 1 s, 330 pps LED Power Dissipation @ TA = 25C Derate above 25C OUTPUT TRANSISTOR Collector-Emitter Voltage Emitter-Collector Voltage Collector-Base Voltage Collector Current -- Continuous Detector Power Dissipation @ TA = 25C Derate above 25C TOTAL DEVICE Total Device Power Dissipation @ TA = 25C Derate above 25C Operating Temperature Range(3) Storage Temperature Range(3) Soldering Temperature (10 s) Isolation Surge Voltage Peak ac Voltage, 60 Hz, 1 Second Duration(1) 1. 1. 2. 1. 3. PD TJ Tstg TL VISO 250 2.94 - 55 to +100 - 55 to +150 260 7500 mW mW/C C C C Vac(pk) VCER VECO VCBO IC PD 300 7 300 100 150 1.76 Volts Volts Volts mA mW mW/C IF IF PD 60 1.2 120 1.41 mA Amps mW mW/C Symbol Value Unit H11D2 [CTR = 20% Min] *Motorola Preferred Device STYLE 1 PLASTIC 6 1 STANDARD THRU HOLE CASE 730A-04 SCHEMATIC 1 2 3 6 5 4 PIN 1. 2. 3. 4. 5. 6. ANODE CATHODE N.C. EMITTER COLLECTOR BASE Isolation surge voltage is an internal device dielectric breakdown rating. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common. H11D1 is rated @ 5656 Volts peak (VISO). H11D2 is rated @ 3535 Volts peak (VISO) Otherwise they are identical, both parts built by Motorola are rated @ 7500 Volts peak (VISO) Refer to Quality and Reliability Section in Opto Data Book for information on test conditions. Preferred devices are Motorola recommended choices for future use and best overall value. GlobalOptoisolator is a trademark of Motorola, Inc. REV 1 (c)MotorolaInc. 1995 Motorola, Optoelectronics Device Data 1 H11D1 H11D2 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted)(1) Characteristic INPUT LED (TA = 25C unless otherwise noted) Reverse Leakage Current (VR = 6 V) Forward Voltage (IF = 10 mA) Capacitance (V = 0 V, f = 1 MHz) OUTPUT TRANSISTOR (TA = 25C and IF = 0 unless otherwise noted) Collector-Emitter Dark Current (RBE = 1 M ) (VCE = 200 V, TA = 25C) (TA = 100C) Collector-Base Breakdown Voltage (IC = 100 A) Collector-Emitter Breakdown Voltage (IC = 1 mA, RBE = 1 M) Emitter-Base Breakdown Voltage (IE = 100 A) COUPLED (TA = 25C unless otherwise noted) Output Collector Current (VCE = 10 V, IF = 10 mA, RBE = 1 M) Surge Isolation Voltage (Input to Output)(3) Peak ac Voltage, 60 Hz, 1 sec Isolation Resistance(3) (V = 500 V) Collector-Emitter Saturation Voltage (IC = 0.5 mA, IF = 10 mA, RBE = 1 M) Isolation Capacitance(3) (V = 0, f = 1 MHz) Turn-On Time Turn-Off Time VCC = 10 V, IC = 2 mA, RL = 100 IC (CTR)(2) H11D1,2 VISO RISO VCE(sat) CISO ton toff 2 (20) 7500 -- -- -- -- -- -- -- 1011 -- 0.2 5 5 -- -- -- 0.4 -- -- -- Vac(pk) Ohms Volts pF s mA (%) ICER H11D1,2 H11D1,2 V(BR)CBO H11D1,2 V(BR)CER H11D1,2 V(BR)EBO -- 7 -- -- 300 -- Volts -- -- 300 Volts -- -- -- -- 100 250 nA A Volts IR VF C -- -- -- -- 1.2 18 10 1.5 -- A Volts pF Symbol Min Typ(1) Max Unit 1. Always design to the specified minimum/maximum electrical limits (where applicable). 2. Current Transfer Ratio (CTR) = IC/IF x 100%. 3. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common. TYPICAL CHARACTERISTICS ICER , OUTPUT CURRENT (mA) 20 10 5 2 1 0.5 0.2 0.1 1 2 5 10 20 IF, LED INPUT CURRENT (mA) 50 RBE = 106 VCE = 10 V TA = 25C ICER, OUTPUT CURRENT (mA) 50 20 10 5 2 1 -60 -40 RBE = 106 VCE = 10 V IF = 20 mA IF = 10 mA IF = 5 mA -20 0 20 40 60 80 TA, AMBIENT TEMPERATURE (C) 100 Figure 1. Output Current versus LED Input Current Figure 2. Output Current versus Temperature 2 Motorola Optoelectronics Device Data H11D1 H11D2 40 ICER , OUTPUT CURRENT (mA) 10 5 1 0.5 0.1 0.05 RBE = 106 TA = 25C VF, FORWARD VOLTAGE (VOLTS) IF = 50 mA IF = 10 mA IF = 5 mA 2 1.8 PULSE ONLY PULSE OR DC 1.6 1.4 TA = -55C 25C 100C 1 10 100 IF, LED FORWARD CURRENT (mA) 1000 1.2 1 0.01 0.005 0.1 0.5 1 5 10 50 100 VCE, COLLECTOR VOLTAGE (VOLTS) 300 Figure 3. Output Characteristics Figure 4. Forward Characteristics 300 IF = 50 mA ICBO, COLLECTOR-BASE CURRENT ( A) 240 180 RBE = 106 VCE = 10 V 1000 ICER , DARK CURRENT (nA) 100 VCE = 300 V VCE = 100 V 10 VCE = 50 V 1 20 30 40 50 60 90 70 80 TA, AMBIENT TEMPERATURE (C) 100 RBE = 106 120 60 0 -60 -40 IF = 10 mA IF = 5 mA -20 0 20 40 60 80 TA, AMBIENT TEMPERATURE (C) 100 Figure 5. Collector-Base Current versus Temperature Figure 6. Dark Current versus Temperature 100 C, CAPACITANCE (pF) CLED CCB 10 f = 1 MHz 1 0.01 0.1 1 V, VOLTAGE (VOLTS) 10 100 Figure 7. Capacitance versus Voltage Motorola Optoelectronics Device Data 3 H11D1 H11D2 PACKAGE DIMENSIONS -A- 6 4 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. ANODE CATHODE NC EMITTER COLLECTOR BASE DIM A B C D E F G J K L M N INCHES MIN MAX 0.320 0.350 0.240 0.260 0.115 0.200 0.016 0.020 0.040 0.070 0.010 0.014 0.100 BSC 0.008 0.012 0.100 0.150 0.300 BSC 0_ 15 _ 0.015 0.100 MILLIMETERS MIN MAX 8.13 8.89 6.10 6.60 2.93 5.08 0.41 0.50 1.02 1.77 0.25 0.36 2.54 BSC 0.21 0.30 2.54 3.81 7.62 BSC 0_ 15 _ 0.38 2.54 -B- 1 3 F 4 PL N C L STYLE 1: PIN 1. 2. 3. 4. 5. 6. -T- SEATING PLANE K G J 6 PL 0.13 (0.005) TA M M E 6 PL D 6 PL 0.13 (0.005) M M TB M A M B M CASE 730A-04 ISSUE G -A- 6 1 4 -B- 3 S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. INCHES MIN MAX 0.320 0.350 0.240 0.260 0.115 0.200 0.016 0.020 0.040 0.070 0.010 0.014 0.100 BSC 0.020 0.025 0.008 0.012 0.006 0.035 0.320 BSC 0.332 0.390 MILLIMETERS MIN MAX 8.13 8.89 6.10 6.60 2.93 5.08 0.41 0.50 1.02 1.77 0.25 0.36 2.54 BSC 0.51 0.63 0.20 0.30 0.16 0.88 8.13 BSC 8.43 9.90 F 4 PL H C L -T- G E 6 PL D 6 PL 0.13 (0.005) M J K 6 PL 0.13 (0.005) TA M M SEATING PLANE TB M A M B M DIM A B C D E F G H J K L S CASE 730C-04 ISSUE D *Consult factory for leadform option availability 4 Motorola Optoelectronics Device Data H11D1 H11D2 -A- 6 4 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. DIM A B C D E F G J K L N INCHES MIN MAX 0.320 0.350 0.240 0.260 0.115 0.200 0.016 0.020 0.040 0.070 0.010 0.014 0.100 BSC 0.008 0.012 0.100 0.150 0.400 0.425 0.015 0.040 MILLIMETERS MIN MAX 8.13 8.89 6.10 6.60 2.93 5.08 0.41 0.50 1.02 1.77 0.25 0.36 2.54 BSC 0.21 0.30 2.54 3.81 10.16 10.80 0.38 1.02 -B- 1 3 F 4 PL N C L -T- SEATING PLANE G D 6 PL K 0.13 (0.005) M J TA M E 6 PL B M *Consult factory for leadform option availability CASE 730D-05 ISSUE D Motorola Optoelectronics Device Data 5 H11D1 H11D2 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE (602) 244-6609 INTERNET: http://Design-NET.com JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, Toshikatsu Otsuki, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-3521-8315 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 6 Motorola Optoelectronics Device Data H11D1/D *H11D1/D* |
Price & Availability of H11D1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |